REVIT ARCHITECTURE

Course Detail
Revit Architecture
(500 Review)

ABOUT THE COURSE

  • After completion of training program on Revit Architecture, students and professionals will get the most and the best from their accounting skills.
  • Revit Architecture training from JAGJIT INSTITUTE Delhi is cost-competitive.
  • Course Completion Certificate to every student and carries global recognition.
  • Revit Architecture Training can be customized after analyzing the company-specific requirements
  • Industry Specific specially tailored Revit Architecturetraining modules.
  • Highly qualified and certified trainers onRevit Architecture with expertise in our instruction methods.
  • At no extra cost, the needy students can repeat the classes with prior permission.
  • For the students to get maximum benefit from the training, One-on-One attention is given to each student.
  • Well maintained Smart Labs with latest equipment where individual can flourish their practical knowledge with hands on practice.
  • To make students become well aware of the complex working scenarios in the work field, we establish strong practices in enhancing their technical skills and concepts on the subject.
  • PG Facilities available in the nearby vicinity for students coming from other states for Revit ArchitectureTraining in Delhi.
  • Our Revit Architecture Course content is structured to cover all the modules within Revit Architecture. From basic to advance, we give Revit Architecture training in Delhi in a manner that is easy to understand.

UNDERSTANDING REVIT ENVIRONMENT AND USER INTERFACE

STARTING A NEW PROJECT
  • Lecture 1.1:
    Creating wall
    30 Minute
  • Lecture 1.2:
    Wall Properties
    30 Minute
  • Lecture 1.3:
    Modifying and Mirroring wall
    30 Minute
  • Lecture 1.4:
    Using Reference Planes Adding Interior Walls
    30 Minute
  • Lecture 1.5:
    Using Temporary Dimensions
    30 Minute
  • Lecture 1.6:
    Displaying Wall Joins
    30 Minute
  • Lecture 1.7:
    Placing Doors and Windows
    30 Minute
  • Lecture 1.8:
    Creating Levels
    30 Minute
  • Lecture 1.9:
    Creating and Modifying Building Sections
    30 Minute
  • Lecture 1.10:
    Adding Wall Sections
    30 Minute
  • Lecture 1.11:
    Placing Doors and Windows
    30 Minute
  • Lecture 1.12:
    Creating Callouts
    30 Minute
  • Lecture 1.13:
    Creating and Modifying a Camera View
    30 Minute
  • Lecture 1.14:
    Creating an Elevation
    30 Minute
  • Lecture 1.15:
    Interior Elevations
    30 Minute
WORKING WITH BASIC EDIT TOOLS
  • Lecture 2.1:
    Move
    30 Minute
  • Lecture 2.2:
    Copy & Rotate
    30 Minute
  • Lecture 2.3:
    The Array Command
    30 Minute
  • Lecture 2.4:
    The Mirror Command
    30 Minute
  • Lecture 2.5:
    The Align Tool
    30 Minute
  • Lecture 2.6:
    The Trim Command
    30 Minute
  • Lecture 2.7:
    The Split Element Command
    30 Minute
  • Lecture 2.8:
    The Offset Command
    30 Minute
APPLYING ANNOTATION AND DIMENSIONS IN PROJECT
  • Lecture 3.1:
    Aligned Dimensions
    30 Minute
  • Lecture 3.2:
    Linear Dimensions
    30 Minute
  • Lecture 3.3:
    Angular Dimensions
    30 Minute
  • Lecture 3.4:
    Radial Dimensions
    30 Minute
  • Lecture 3.5:
    Placing Text and Annotations
    30 Minute
  • Lecture 3.6:
    Adding Leader Text
    30 Minute
  • Lecture 3.7:
    Modifying the Text Placement
    30 Minute
  • Lecture 3.8:
    Changing Text Properties
    30 Minute
WORKING WITH FLOORS
  • Lecture 4.1:
    Placing a Floor Slab
    30 Minute
  • Lecture 4.2:
    Creating the Slab
    30 Minute
  • Lecture 4.3:
    Sketching the Slab
    30 Minute
  • Lecture 4.4:
    Building a Floor by Layers
    30 Minute
  • Lecture 4.5:
    Splitting the Floor Materials
    30 Minute
  • Lecture 4.6:
    Adding an Alternate Material
    30 Minute
  • Lecture 4.7:
    Pitching a Floor to a Floor Drain
    30 Minute
  • Lecture 4.8:
    Creating Shaft Openings
    30 Minute
ROOFS
  • Lecture 5.1:
    Placing Roofs by Footprint
    30 Minute
  • Lecture 5.2:
    Flat Roofs by Footprint
    30 Minute
  • Lecture 5.3:
    Pitched Roofs by Footprint
    30 Minute
  • Lecture 5.4:
    Creating a Sloping Roof
    30 Minute
  • Lecture 5.5:
    Creating Roofs by Extrusion
    30 Minute
  • Lecture 5.6:
    Adding a Roof Dormer
    30 Minute
CELLING DESIGN
  • Lecture 6.1:
    Creating Ceilings
    30 Minute
  • Lecture 6.2:
    Modifying Ceiling Grids
    30 Minute
  • Lecture 6.3:
    Creating a Plan Region
    30 Minute
  • Lecture 6.4:
    Creating Ceiling Openings and Soffits
    30 Minute
  • Lecture 6.5:
    Adding Interior Design
    30 Minute
  • Lecture 6.6:
    Adding Light Fixtures to Ceilings
    30 Minute
  • Lecture 6.7:
    Adding Plumbing Fixtures and Furniture
    30 Minute
  • Lecture 6.8:
    Adding Parabolic Troffers
    30 Minute
WORKING WITH STAIRS, RAILING AND RAMPS
  • Lecture 7.1:
    Creating Stairs by Using the Rise/Run Function
    30 Minute
  • Lecture 7.2:
    Modifying Boundaries
    30 Minute
  • Lecture 7.3:
    Configuring Railings
    30 Minute
  • Lecture 7.4:
    Creating a Winding Staircase
    30 Minute
  • Lecture 7.5:
    Creating a Custom Railing System
    30 Minute
  • Lecture 7.6:
    Adding Ramps
    30 Minute
CREATING SCHEDULES AND TAGS
  • Lecture 8.1:
    Creating Schedules
    30 Minute
  • Lecture 8.2:
    Adding Fields to a Schedule
    30 Minute
  • Lecture 8.3:
    Modifying Elements in a Schedule
    30 Minute
  • Lecture 8.4:
    Creating Material Takeoffs
    30 Minute
  • Lecture 8.5:
    Creating a Calculated Value Field
    30 Minute
  • Lecture 8.6:
    Adding Tags
    30 Minute
  • Lecture 8.7:
    Adding Tags Individually
    30 Minute
  • Lecture 8.8:
    Tagging by Material
    30 Minute
CREATING DRAWING SHEETS AND PRINTING
  • Lecture 9.1:
    Creating and Populating Sheets
    30 Minute
  • Lecture 9.2:
    Sheet Organization
    30 Minute
  • Lecture 9.3:
    Modifying a Viewport
    30 Minute
  • Lecture 9.4:
    Adding Revisions to a Sheet
    30 Minute
  • Lecture 9.5:
    Addressing Project Parameters
    30 Minute
  • Lecture 9.6:
    Printing from Revit Architecture
    30 Minute
WORKING WITH ROOMS AND AREA PLANS
  • Lecture 10.1:
    Creating Rooms
    30 Minute
  • Lecture 10.2:
    Configuring Properties
    30 Minute
  • Lecture 10.3:
    Placing and Manipulating Room Tags
    30 Minute
  • Lecture 10.4:
    Adding a Room Schedule
    30 Minute
  • Lecture 10.5:
    Adding a Color-Fill Plan
    30 Minute
  • Lecture 10.6:
    Adding Room Separators
    30 Minute
  • Lecture 10.7:
    Creating an Area Plan
    30 Minute
RENDERING AND PRESENTATION
  • Lecture 11.1:
    Creating an Exterior Rendering
    30 Minute
  • Lecture 11.2:
    Creating Lighting Groups
    30 Minute
  • Lecture 11.3:
    Creating an Interior Rendering
    30 Minute
  • Lecture 11.4:
    Creating Walkthroughs
    30 Minute
  • Lecture 11.5:
    Exporting an Animation
    30 Minute
  • Lecture 11.6:
    Importing and Exporting CAD Formats
    30 Minute