DELCAM FEATURECAM

Course Detail
DELCAM FEATURECAM
(4500 Review)

ABOUT THE COURSE

  • FeatureCAM offers solutions for 2D and 3D milling, 5-axis simultaneous machining, high-speed milling, turning, turn/mill, live tooling and wire EDM.
  • FeatureCAM modular training courses are designed to closely meet your needs.
  • Courses provide you with focused training given by our most experienced engineers.

OUR CURRICULUM

FeatureMlLL 2.5D Basic Tools
  • Lecture 1.1:
    Feature-based Programming
    30 Minute
  • Lecture 1.2:
    CAM Software Strategies
    30 Minute
  • Lecture 1.3:
    User Interface
    30 Minute
  • Lecture 1.4:
    Stock Types
    30 Minute
  • Lecture 1.5:
    Creating a Part
    30 Minute
  • Lecture 1.6:
    Snapping Controls
    30 Minute
  • Lecture 1.7:
    Geometry
    30 Minute
  • Lecture 1.8:
    Line Construction
    30 Minute
  • Lecture 1.9:
    Circle/Fillet/Arc Construction
    30 Minute
  • Lecture 1.10:
    Chamfers
    30 Minute
  • Lecture 1.11:
    Dimensioning
    30 Minute
FeatureMlLL 2.5D Advanced
  • Lecture 2.1:
    Multiple Curves in One Feature
    30 Minute
  • Lecture 2.2:
    Multiple Bosses
    30 Minute
  • Lecture 2.3:
    Pockets with Islands
    30 Minute
  • Lecture 2.4:
    Multiple Side Features
    30 Minute
  • Lecture 2.5:
    Multiple Plunge Point Curves
    30 Minute
  • Lecture 2.6:
    Using Cross Sections
    30 Minute
  • Lecture 2.7:
    3Multiple Fixtures
    30 Minute
  • Lecture 2.8:
    Grooving
    30 Minute
  • Lecture 2.9:
    4 Axis Indexing and Wrapping
    30 Minute
FeatureMILL 3D Topics
  • Lecture 3.1:
    DRoughing Basics
    30 Minute
  • Lecture 3.2:
    Z-Level Roughing
    30 Minute
  • Lecture 3.3:
    Offset Spiral Roughing
    30 Minute
  • Lecture 3.4:
    Parallel Roughing
    30 Minute
  • Lecture 3.5:
    Plunge Roughing
    30 Minute
  • Lecture 3.6:
    Stock and Boundaries
    30 Minute
  • Lecture 3.7:
    Leads and Ramps
    30 Minute
  • Lecture 3.8:
    High Speed & High Efficiency Roughing
    30 Minute
  • Lecture 3.9:
    Finishing Basics
    30 Minute
  • Lecture 3.10:
    3-Axis Swarf
    30 Minute
  • Lecture 3.11:
    4-Axis Rotary
    30 Minute
  • Lecture 3.12:
    Wall Tolerance for Z-Level
    30 Minute
FeatureTURN Topics
  • Lecture 4.1:
    Interface and Menus
    30 Minute
  • Lecture 4.2:
    Drawing Geometry
    30 Minute
  • Lecture 4.3:
    Creating Features
    30 Minute
  • Lecture 4.4:
    Features from Dimensions
    30 Minute
  • Lecture 4.5:
    Threading
    30 Minute
  • Lecture 4.6:
    Barfeed and Bar Puller
    30 Minute
  • Lecture 4.7:
    Canned Cycles
    30 Minute
  • Lecture 4.8:
    Boring
    30 Minute
  • Lecture 4.9:
    Turning with No Undercuts
    30 Minute
FeatureTURN/MILL Topics
  • Lecture 5.1:
    Creating TURN/MILL Features
    30 Minute
  • Lecture 5.2:
    Positioning TURN/MILL Features
    30 Minute
  • Lecture 5.3:
    Synchronization Basics
    30 Minute
  • Lecture 5.4:
    Hole Synchronization
    30 Minute
  • Lecture 5.5:
    5-Axis Trim
    30 Minute
  • Lecture 5.6:
    5-Axis Swarf
    30 Minute
  • Lecture 5.7:
    B-Axis Interactive Feature Recognition
    30 Minute
  • Lecture 5.8:
    B-Axis Swarf
    30 Minute
  • Lecture 5.9:
    Multi-Turret Synchronization
    30 Minute